✓ Бесплатное размещение до пяти вакансий на месяц

✓ Бесплатный доступ к базе резюме

✓ Быстрое закрытие вакансий линейного персонала

✓ Недорогие тарифы для крупных работодателей и агентств




Welding Inspector - резюме 190592

Raja Gopala Krishnan Janakiraman

Дата обновления: 01.03.2021

Город: Москва

Отрасль: Другое

Тип занятости: Не имеет значения

Опыт работы (лет): 19

Образование: Высшее

Текст резюме:

RAJA GOPALA KRISHNAN.J

QA QC WELDING / PIPING / PAINTING ENGINEER


Nationality - INDIAN
D.O.B – 26 / Feb / 1975
Marital Status - Married

Language Known –
English, Tamil & Hindi

Contact No:- +919840284718 / +914443114946

Email: - rajagopaljobsearch@gmail.com
Passport No. – N9344592
Date of Expiry – 12- Apr- 2026 India Address -
Flat 3B, 3rd Floor,
Magnolia Apartment,
Anna Nagar, Lakshmi Nagar Extension, Porur,
Chennai – 600 116.

OBJECTIVES

To obtain a job which will challenge me and allow me to use my education, skills and past experiences in a way that is mutually beneficial to both myself and my employer and allow for future growth and advancement.


SUMMARY OF EXPERIENCE

Having more than 19 Years’ experience in QC welding Inspection, Piping, Plant piping, Cross Country Pipelines, Pressure Vessel, Valve Inspection, Pop-up Test, GRE / GRP, Structural activities like offshore hook up, Oil Platform, Deck Erection, Jack-up Rig & Submersible Rig and structural steel work, NDT, Painting Inspection, Mechanical inspection in both static/Rotating, Pre-commissioning & Commissioning. Review Procedures like QCP, ITP, NDT, Method Statement and PWHT Charts. Attend Kick Off meeting with client. Solving technical issues, carry out Quality Audit Program in ISO standards and having knowledge in international organization of standardization 9001 – 2015. Also having experience in inspection in Electrical and Injection Molding Machine in esteemed organizations in UAE, Singapore, Saudi Arabia and India. Hands on experience in working with fabrication codes for pressure vessel, Saudi Aramco standards, Borouge Standards, Takreer Standards, International Standards like ASME Sec - II, Sec-V, Sec- VIII Division -1, Sec-IX, B31.3, API- 1104, AWS-D1.1 etc.

ACADEMIC & PROFESSIONAL QUALIFICATION
 Diploma in Electrical & Electronics Engineering - Board of Technical Education, Tamil Nadu - May 1996
 AWS Senior Certified Welding Inspector (SCWI) – Certificate Number – 16080088 (Expiry on 01-Aug-2022)
 CWB Welding Specialist Mark (WSM) - Unique ID number – WSM100695
 NACE Coating Inspector Level 1 – Certificate Number – 21795 (Expiry on 28-Feb-2021)
 Saudi ARAMCO Approved both for Welding - (SAP # 70009454) and approved for Painting
 ASNT Level II Certificate from IQC ( File Number – 240609 )
 Radiographic Testing – Level II of SNT / TC/ 1A – 1996 / 2001 (Expiry on 17-May-2025)
 Penetrant Testing – Level II of SNT / TC/ 1A – 2011 / 2016 (Expiry on 13-Jun-2023)
 Magnetic Particle Testing – Level II of SNT / TC/ 1A – 2011 / 2016 (Expiry on 15-Jun-2023)
 Ultrasonic Testing – Level II of SNT / TC/ 1A – 2011 / 2016 (Expiry on 29-Jun-2023)
 ISO 9001:2015 Lead Auditor (QMS) Certificate No. 3522 4530 05 & Delegate No. 106156 organized by TUV NORD

TRAINING COURSES ATTENDED

 One week training on Material and Welding inspection conducted by AWS-Industrial Quality Concepts Chennai in Preparation for AWS – CWI and SCWI Examination.
 Five days training on ASNT Level II Certificate conducted by Industrial Quality Concepts & NDT International, Chennai.
 Sea Survival Training conducted by Emirates Technical & Safety Development Center (ETSDC) – Abu Dhabi
 Basic Fire Fighting System Conducted by Emirates Technical & Safety Development Center (ETSDC) – Abu Dhabi
 HSE Induction & Hydrogen Sulphide Training by Safety Technical Service Co. Ltd., - Oman
 Advanced Safety Auditing training process organized by Global Santafe
 Painting Inspection training program organized by Industrial Quality Concepts, Chennai
 Risk Assessment “Introduction” training program organized by Bureau Veritas – Abu Dhabi
 Defensive Driving Awareness training program organized by Bureau Veritas – Abu Dhabi
 Cardinal Safety Rules training program organized by Bureau Veritas – Abu Dhabi
 Shop Inspection Techniques training program organized by Bureau Veritas – Abu Dhabi
 Non Destructive Testing on Welding training program organized by Bureau Veritas – Abu Dhabi
 Lead Audit Course attended at TUV India Pvt Ltd
 Webinar training program organized by TUV Nord on Topics are
 Overview of NDE requirements by ASME Section VIII Div 1 & ASME Section V
 Introduction to Good Foundry Practices and Inspection of Steel Casting.
 Basic of Heat Treatment and PWHT Requirement as per ASME Sectin VIII DiV 1
 Design Basics for Non Designers, ASME Section VIII Div.1
 Overview on Good Fabrication Practices in Pressure Vessel Manufacturing
 Basics of Corrosion Protection and Painting
 Online training program organized by Canadian Welding Bureau on Topics are
 Basic Inspection Methods
 Introduction to Welding Processes
 Welding Specialist Mark Program
 Webinar training program organized by Velosi on Topics are
 API 580/581: Fundamentals of Risk Based Inspection Program (Case Study)

WORK HISTORY

 SGS - IRAQ : 02 Oct 2018 to 31 May 2019
Welding Inspector
Project - Basra Gateway Terminal (Berth 25 & Berth 26)
Position - Welding Inspector
Client - Basra Gateway Terminal
Location - Umm Qasr, Basra - IRAQ
Duration - Oct 2018 - May 2019
Job Responsibilities for Piping / Welding
• Inspection are carried according to Project Specification, Quality Control Procedure, Inspection and Test Plan and International Standard, mainly on all welding activities involved for the fabrication of piling piping spools in shop and on the field installation of piling piping joints.
• Ensure that all materials used for fabrication and welding parameters conform to the project specification requirements, scope of works as per approved drawing for construction.
• Conduct daily routine checks on all welding activities if welding parameters in applicable WPS have been achieved such as bevel tolerances, cleaning, welding consumables type and size, welder qualification, welding equipment condition, pre-heating (if required) and inter-pass temperature requirement, electrical characteristics (amp-volts) welding speed, welding size, welding sequence.
• 100% visual inspection on all welded joints and review daily welding reports and schedules NDT.
• Interpretation of ultrasonic testing ( UT )
• Interpretation of radiographic film ( RT )
• Prepare discrepancy report on observations during routine inspection.
• Monitoring onsite HSE performance of production/projects contractors’ in line with company HSE requirements, regulatory requirements, best industrial practices etc.

 Bureau Veritas, Abu Dhabi – UAE : 05-Jun-2011 to 31-Mar-2018
QA/QC Welding / Piping NDE Inspector

A) Project - ADNOC Carbon Black & Delayed Coker, Ruwais
Position - TPI Welding / Piping
Client - ADNOC Ruwais Refinery
PMC - Jacobs
Contractor - Sumsaung Engineering
Sub-Contractor - Al Jabber, Bhawan Engineering, NSH, GRP, UPI
Location - Adnoc Ruwais Refinery Site – Ruwais – Abu Dhabi
Duration - Jul 2014 - 31-Mar-2018

B) Project - TAKREER Ruwais Refinery Expansion, Ruwais
Package - Offsites and Utilities ( Pacakge # 3 )
Position - Leave Re-Placement Welding / Piping / Pre-Commission (TPI)
Client - TAKREER Ruwais Refinery
PMC - Mott MacDonald
Contractor - Sumsaung Engineering
Sub-Contractor - NSH & MKG
Location - Takreer Ruwais Refinery Site – Ruwais – Abu Dhabi
Duration - Jun 2014 - July 2014

C) Project - Borouge Ethylene Cracker Unit 3, Ruwais
Package - EU3
Position - Welding / Piping Inspector (TPI)
Client - Borouge ( Abu Dhabi Polymer Company )
PMC - Bechtel
Contractor - Linde Engineering
Sub-Contractor - Consolidated Contracting Intl. Co
Location - Borouge Site – Ruwais – Abu Dhabi
Duration - Jun 2011 - Apr 2014 (3 Years)

Job Responsibilities for Piping / Welding
• Inspection are carried according to Project Specification, Quality Control Procedure, Inspection and Test Plan and International Standard, mainly on all welding activities involved for the fabrication of piping spools in shop and on the field installation which includes tie-in jobs to all piping contained within modules, packages or sub-assemblies and on plant equipment.
• Ensure that all materials used for fabrication and welding parameters conform to the project specification requirements, scope of works as per approved drawing for construction.
• Control and maintain record such as NDT percentage, welder percentage, material traceability, alloy verification.
• Conduct daily routine checks on all welding activities if welding parameters in applicable WPS have been achieved such as bevel tolerances, cleaning, welding consumables type and size, welder qualification, welding equipment condition, pre-heating (if required) and inter-pass temperature requirement, electrical characteristics (amp-volts) welding speed, welding size, welding sequence as well as PWHT (if required).
• Random visual inspection on all welded joints and review daily welding reports and schedules NDT, PWHT and hardness test as per required based on piping NDE matrix.
• Interpretation of radiographic film ( RT )
• Prepare discrepancy report on observations during routine inspection.
• Review test package and conduct walk-through inspection, punch list and submit to client for final review and acceptance.
• Witnessing hydro-test / pneumatic test.
• Monitoring onsite HSE performance of production/projects contractors’ in line with company HSE requirements, regulatory requirements, best industrial practices etc.
Job Responsibilities for GRE
• Review of material inspection
• Monitoring / Review internal cleaning document
• Witnessed Bonded Joint
• Monitors bonding process and carry out visual inspection after curing
• Checks spigots after shaving
• Checks joints as per the specified drawing
• Monitors over wrapping process and accepts visually
• Monitor lamination woven roving for fit-up and for main laminate
• Witness dimension check for laminate
• Witness barcol hardness test
• Review of test package and release for hydro test or leak test
• Witness line inspection
• Witness hydro or leak test
• Witness reinstatement check
• Release for final backfilling
Responsibilities for Pre-commissioning & Commissioning Activities
• Witnessed inspection activities like air blowing & flushing
• Witnessed inspection activities like Leak Test
• Witnessed inspection activities like steam blowing
• Witnessed inertization Walk through activities (LOTO walk through Inspection)
• Witnessed inertization inspection to check O2 level.
• Witnessed chemicals and catalyst loading
• Witnessed hydrocarbon, H2 and utilities commissioning on the new Units
 Lindinger Inspection Services, Dubai - UAE : 28 May 2010 to 19 Aug 2010
QA/QC Inspector Welding / Painting
Project - KARAN Offshore Platforms and Subsea
Position - QC Welding / Painting Inspector
Client - SAUDI ARAMCO
Contractor - J.Ray McDermott
Location - J.Ray McDermott Fabrication Yard Jebel Ali Free Zone - Dubai
Duration - May 2010 - Aug 2010

Job Handle :- Karan TP1 Jacket, Karan Helideck of TP 1, Aux 6-9/16, Aux 17/25, Karan Aux Cellar Deck 17/25, Karan WHP Cellar Deck of 17/25, Karan WHP Cellar Deck of 26/34, Karan WHP Lower Mezz Deck of 26/34
Job Responsibilities
• Responsibilities were to coordinate with the client for inspection & review of daily fit-up & welding report etc.
• In addition, conducting Tool box meetings & reporting every day issues to QC Manager also part my responsibilities.
• To look after and supervise fit-up and welding inspection activities in the assigned area.
• Maintaining record of welder’s qualification & ensuring WPS was properly followed.
• Surveillance of consumables.
• Inspection of structural for deck & Jacket are carried out as per aramco Standard.
• Monitoring the material during fabrication, Inspection of Fit-ups as per aramco standard.
• Monitoring of Welding Parameters, Inspection of welding and arrangement for NDT as per aramco standard.

 SGS, Dubai - UAE : 08 Aug 2007 to 27 Oct 2009 & 25 Aug 2005 to 15 Apr 2007
Worked as QA QC Welding inspector for various project’s local and international clients for onshore and offshore. Assignments involved third party inspection services and QA/QC inspection services on major steel fabrication projects, verifying welder qualification tests, mechanical test and Valve Test. Witness PQR & WQT and review WPS, PQR and WQT Procedure.

Vendor Inspection
• Witness material inspection are pipes, fittings and valves are carried out
• Witness pop-up test inspection are carried out in DEWA
• Witness mechanical test inspection are tensile test, bend test, impact test and macro test are carried out
• Witness WPS, PQR and WQT inspection are carried out

Projects

Project - SFNY 920, 960, 970, 980, 990 & BRRI 420
Position - QC Welding / Painting Inspector
Client - SAUDI ARAMCO
Contractor - J.Ray McDermott
Location - J.Ray McDermott Fabrication Yard jebel Ali FreeZone - Dubai
Duration - Jun 2009 – Oct 2009

Project - Wellhead Module CD, Al Shaheen Development
Position - QC Welding / Painting Inspector
Client - MEARSK Oil Qatar
Contractor - J.Ray McDermott
Location - J.Ray McDermott Fabrication Yard jebel Ali FreeZone - Dubai
Duration - Apr 2009 – May 2009

Project - KGD6 Control & Riser Platform
Position - QC Welding Inspector
Client - Reliance
Contractor - J.Ray McDermott
Location - J.Ray McDermott Fabrication Yard jebel Ali FreeZone - Dubai
Duration - Aug 2007 – Feb 2008

Job Responsibilities

• Inspections are carried out as per Project Specification.
• Monitoring of material traceability as required during fabrication, Inspection of Fit-ups, Monitoring of Welding Parameters, Inspection of welding and arrangement for NDT as required
• Review test packages (with reference to P&ID, Isometric, Weld History Sheet, NDT Reports…)
• Witness Line inspection
• Issue Punch list
• Witnessing hydro-test / pneumatic test.
• Flange Management carried out as per Project Specification.
• Inspection of Protecting Coating Materials to make sure the compliance with Project Specification.
• Review of painting specifications, blasting and painting procedures, materials receipt inspection and verification.
• Inspection / Supervision of surface preparation and painting works of piping systems
• Conversant with inspection techniques such as surface cleanliness/profile check, chloride test, WFT & DFT Checks, Adhesion test, MEK Test, Holiday detection etc... As per the industry standards.
• Identifying coating defects during and after application of coating systems
• Following specific duties such as recording weather conditions & substrate temperature by using Whirling hygrometer, dew point & RH % slide calculator and steel temperature gauge.
• Prepare and monitor punch list items, ensuring they are being resolved according to the turn over system.
• Getting release note from the client at every stage.

Project - PROJ.2308-SINGAPORE NExBTL PLANT
Position - QC Welding / Structural Inspector
Client - NESTE OIL SINGAPORE
Contractor - William Hare
Location - William Hare Fabrication Yard – Mussaffa – Abu Dhabi
Duration - Dec 2008 – March 2009

Job Responsibilities

• Material Receiving Inspection, Verification of Mill Certificates for compliance with Purchase Order and Project Specification requirements, assisting the Stores to identify nonconforming materials and preparation of necessary NCRs.
• Witness the Material Testing according to EN 10025 in Body Coat Testing Laboratory – Abu Dhabi
• Monitoring the material during fabrication, Inspection of Fit-ups, Monitoring of Welding Parameters and Inspection of all finished welds and review and measuring the final dimensions.
• Witnessed Galvanization of the material as per BS EN ISO 1461:1999
• Reviewed documents related to the project.

Project - BeAAT
Position - QC Welding / Painting Inspector
Client - TAKREER
Contractor - SNC LAVALIN INTERNATIONAL
Location - BeAAT Site – Ruwais – Abu Dhabi
Duration - Mar 2008 – Oct 2008
Project - Dubal Extension
Position - QC Welding Inspector
Client - Dubal (Dubai Aluminum)
Contractor - SNC LAVALIN INTERNATIONAL
Location - Al Nasar Fabrication Site – Jebel Ali - Dubai
Duration - Dec 2005 – Nov 2006

Job Responsibilities

• Inspection of Fit-ups, Monitoring of Welding Parameters, Inspection of all finished welds and arrangement for NDT as required.
• Interpretation of Radiograph film
• Test Pack preparation for Pipes Line
• Review test packages (with reference to P&ID, Isometric, Weld History Sheet, NDT Reports…)
• Witness Line inspection
• Issue Punch list
• Reviewed and Witnessed Hydro Test of the Pipe Spool as per Project Specification
• Inspection of surface preparation for fabricated structure & Pipe Spool before painting
• Inspection of painting and monitoring the painting process to achieve the required Project Specification Quality.
• Monitoring of environmental conditions.
• Checking of painting process from surface preparation to Top Coat Stage.
• Checking of Profile, WFT, DFT, adhesion & Holiday Test as per the specification.
• Getting release note from the client at every stage.
• Inspection of installation equipment.
• Inspection for alignment of Rotary and Static Equipments.

Project - Highisland IV Jackup Rig
Client - Globalsantafe
Project - C.KIRK RHEIN JR RIG
Client - Transocean
Location - Lambrell jetty Hamriya Freezone - Sharjah
Position - QC Welding Inspector
Contractor - Lambrell - Sharjah
Location - Lambrell jetty Sharjah
Duration - Jan 2007 – Apr 2007

Job Responsibilities for jack-up & submersible rig

• Front Line inspection of rig refurbishment and design change work which include inspection welding, dimensional, monitoring of NDT, cantilever, high and low pressure pipe, skid, hulk, blasting tank, accommodation, module and sputgan.
• Review and approval ITP as per code and client required.
• Monitor of NDT activities.
• Witness of Hydro test.
• Perform line / tank check, punch list involved hydro test and re-instatement activities.
• Involved in activities relating to mechanical completion.
• Review of WPS, PQR and WQT as per contractual Procedure.
• Involving in painting inspection.

Project - OXY, QATAR
Position - QC Welding Inspector
Client - OXY, QATAR
Contractor - NPCC - Abu Dhabi
Location - NPCC Fabrication Yard – Abu Dhabi & Oxy Offshore - Qatar
Duration - Aug 2005 – Nov 2005

Job Handle: - Offshore Hook-up and tie-in Spool

Job Responsibilities

• Inspection are carried out as per ASME B31.3, AWS D1.1, API 1104 etc
• Witnessing of WPS, PQR and WQT qualification test as per Project Specification.
• Inspection of fit-up of pipe spool and piles.
• Monitoring welding parameters, inspection of welds.
• NDT reports and radiographs and prepare necessary data books for the completed items.
• Inspection of Film Wrapping in the welded joints for the tie in spool.

 Cutech Solutions and Services Pte Ltd - Singapore : 01 May 2007 to 09 Jul 2007
Worked as QA/QC inspector in various project’s in local and international clients. Assignments involved third party inspection services and QA/QC inspection services on major steel fabrication projects, verifying welder qualification tests.
\
Job Responsibilities

• For ONGC project as a third party inspector for BVQI for material inspection in Hup Steel & Regency steel in Singapore for PT Sempec Indonesia.
• For Maari Field Development Wellhead Jacket Erection project as a Client Inspector of PV for Clough in Asia Offshore services for Corbel Structural.

 Abdullah – H Al Shuwayer Group, Damam - KSA : 18 Sep 2004 to 16 Feb 2005
Worked as QC Inspector Welding

Job Responsibility

• Material Receiving Inspection, Verification of Mill Certificates for compliance with Purchase Order and Project Specification requirements, assisting the Stores to identify nonconforming materials and preparation of necessary NCRs.
• Monitoring of material traceability as required during fabrication, Inspection of Fit-ups, Monitoring of Welding Parameters, Inspection of all finished welds and arrange for NDT as required.
• Review NDT reports, radiographs and prepare necessary data books for the completed items.

 Mabel Engineers Private Limited, Chennai – India : 27 Jan 2004 to 30 Jun 2004
Mabel is one of the leading manufacturers of Pressure Vessels in Chennai India Meeting ASME Section – VIII Requirements. Worked as QC Inspector Trainee for Material & Welding Inspection

Job Responsibility
• Raw Material Receiving Inspection, Verification of Mill Certificates for compliance with Purchase Order and Code requirements, assisting the Stores to identify nonconforming materials and preparation of necessary NCRs.
• Monitoring of full material traceability during the Vessel Manufacturing, Inspection of Fit-ups, Monitoring of Welding Parameters, Inspection of all finished welds and arrange for NDT as required.
• Witness PQR & WQT and review WPS, PQR & WQT Procedure.
• Review NDT reports and radiographs and prepare necessary data books for the completed vessels.
• Coordinate and monitor Welding Procedure Qualification and Welder’s Qualification to various code requirements.

 Mold Tek. Technologies Limited, Hyderabad - India : 02 Sep 2002 to 05 Dec 2002
Worked as Maintenance Engineer in plastic injection molding.

 Nilkamal Plastics Ltd, Pondicherry - India : 01 Apr 1998 to 25 Aug 2002
Worked as Maintenance Engineer in plastic injection molding.

 Snam Alloys Pvt. Ltd, Pondicherry - India : 02 Jun 1997 to 30 Nov 1997
Worked as a Trainee and work carried out in maintenance of 22 KV HT Yard, 3000 KVA, 22 KV Furnace Transformer, 22 KV MOCB and 22 KV M.V. Panels.

 C. S. K. Electrical Contractors, Pondicherry - India : 02 May 1996 to 31 May 1997
• Worked as a Supervisor for the execution of a major electrical contract involving the following work
• Erection of 750 kV A Transformer & 500 kV A Diesel Generator Set
• Cable lying & terminations, Installation of Motors up to 50 HP with Star Delta and D O L Starter, Power Capacitors & Building Lighting works.





Контактные данные:

Чтобы связаться с кандидатом, вам необходимо войти на сайт.

Форма входа находится в верхнем меню справа. Если вы не зарегистрированы как работодатель, воспользуйтесь этой ссылкой.